HOG 10 DN 1024 I +FSL Baumer Vietnam

Mô tả
Đánh giá (0)

HOG 10 DN 1024 I +FSL Baumer Vietnam

HOG 10 DN 1024 I +FSL Baumer Vietnam hiện đang được HandHeld phân phối rộng rãi tại thị trường Việt Nam, ứng dụng trong hầu hết lĩnh vực…

Baumer Vietnam

Technical data – electrical ratings
Voltage supply	4.75…30 VDC
Consumption typ.	100 mA (24 VDC, w/o load)
Pulses per revolution	100…25000
Sensing method	Optical
Output frequency	≤300 kHz
Output signals	A 90° B
Output stages	Push-pull antivalent, short-circuit proof (HTL)
Interference immunity	DIN EN 61000-6-2
Emitted interference	DIN EN 61000-6-3
Technical data – mechanical design
Size (flange)	ø40 mm
Shaft type	ø6 mm solid shaft
Protection DIN EN 60529	IP 64
Operating speed	≤3000 rpm
Operating torque typ.	0.0075 Nm (3000 rpm / 20 °C)
Materials	Encoder housing: aluminiumMeasuring arm: Aluminium/steelMeasuring wheel: Aluminium/NBR
Operating temperature	-20…+85 °C
Relative humidity	95 % non-condensing
Resistance	DIN EN 60068-2-6 Vibration 10 g, 10-200 Hz DIN EN 60068-2-27 Shock 50 g, 11 ms
Connection	Connector M12, 8-pin Cable 2 m
Weight approx.	100 g

Data type	Design	Download	Size
Data sheet	MA20		333 kb

Sample picture	Product family	Description
HOG 10 DN 1024 I +FSL 1980RPM	Connectors and cables	Female connector M12, 8-pin, straight, without cable

Technical data – electrical ratings
Shaft insulation Suitable up to 2.8 kV
Transmission length ≤350 m at 100 kHz (HTL-P)
≤550 m at 100 kHz (TTL)
Interference immunity EN 61000-6-2
Emitted interference EN 61000-6-3
Approval CE
Technical data – electrical ratings (encoder)
Voltage supply 9…30 VDC; 5 VDC ±5 %
Consumption w/o load ≤100 mA
Pulses per revolution 300 … 5000
Phase shift 90 ° ±20°
Duty cycle 40…60 %
Reference signal Zero pulse, width 90°
Output frequency ≤120 kHz
≤300 kHz (on request)
Output signals K1, K2, K0 + inverted
Error output (option EMS)
Output stages HTL-P (power linedriver)
TTL/RS422
Sensing method Optical
Technical data – electrical ratings (centrifugal switch)
Switching accuracy ± 4 % (Δn = 2 rpm/s);
20 % (Δn = 1500 rpm/s)
Switching deviation ≤3 % (cw-ccw rotation)
Switching hysteresis 40 % of switching speed
Switching outputs 1 output, speed control
Output switching capacity ≤6 A / 230 VAC; ≤1 A / 125 VDC
(EAC: <50 VAC / 75 VDC)