CES-FD-AP-M-01-USI-115534 Euchner Vietnam
CES-FD-AP-M-01-USI-115534 (Order no. 115534) hiện đang được HandHeld phân phối tại thị trường Việt Nam, ứng dụng trong hầu hết lĩnh vực…
CES-FD-AP-M-01-USI-115534 (Order no. 115534)
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | <= 10 |
Electrical connection values
| Fuse | |
| external (operating voltage) | 0.25 … 8 A |
| Rated insulation voltage Ui | 75 V |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Operating voltage DC | |
| UB (PELV, see operating instructions) (reverse polarity protected, regulated, residual ripple<5%) | 24 V DC -15% … +15% |
| Turn-on time | |
| Safety outputs | max. 400 ms |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Safety class | III |
| Current consumption | max. 45 mA |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Safety outputs FO1A / FO1B | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| LOW U(FO1A) / U(FO1B) | 0 … 1 V DC |
| HIGH U(FO1A) / U(FO1B) | UB-1.5V … UB V DC |
| rated conditional short-circuit current | 100 A |
| Discrepancy time | max. 10 ms |
| Utilization category | |
| DC-13 | 24 V 150 mA |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output | 1 … 150 mA |
| Test pulse duration | max. 0.3 ms |
| Test pulse interval | min. 100 ms |
Mechanical values and environment
| Connection type | Connecting cable PUR with plug connector M12, 5-pin; pin 5 not used |
| Tightening torque | max. 1 Nm |
| Ready delay | 1 s |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP65/IP67 |
| Cable ambient temperature (dynamic) | -5 … +65 °C |
| Cable ambient temperature (static) | -20 … +65 °C |
| Material | |
| Housing | Plastic, PBT |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Mission time | 20 y |
| Monitoring of the guard position | |
| Category | 4 |
| Performance Level | PL e |
| PFHD | 4.5 x 10-9 |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures |
In combination with read head CES-A-LMN-SC and actuator CES-A-BMB
| Switch-on distance | 5 mm |
| Secured switch-off distance sar | max. 10 mm |
| Secured switching distance sao | min. 3.4 mm |
| Switching hysteresis | 0.05 … 0.2 mm |
Field evaluation unit CES-FD-AP-…
- Connection of a CES/CKS read head
- Evaluation of signals in the field
- Connection to the ET200s and ET200pro
- Familiar EUCHNER AP interface
- Multicode
Euchner Vietnam
| SR11WF (ORDER NO. 054773) |
| NZ2HS-3131 (ORDER NO. 090856) |
| TX3B-A024MC1991 (ORDER NO. 085391) |
| 106159 |
| 106159 |
| CES-A-LNA-SC-077715 |
| 124225 |
| 111080 |
| ORDER NO. 113187 |
| 113187 |
| 73457 |
| 73456 |
| 73455 |
| 113187 |
| 104302 + 100464 |
| 082051 + 076200 |
| CES-AZ-AES-01B |
| 121026 |
| 110906+123433+100179+100185+100181 |
Euchner Vietnam
Hãy là người đầu tiên nhận xét “CES-FD-AP-M-01-USI-115534 Euchner Vietnam”
Sản phẩm tương tự
Khác
Trạm treo
Khóa an toàn
Công tắc an toàn
Khóa an toàn
Đánh giá
Chưa có đánh giá nào.